Hydra 1kg

Product code: 4823075806010
Not available
8.48 €

Purpose: stain remover for carpets and upholstery of upholstered furniture. It is used for light discolouration of vegetable dyes. It is used to restore colour to carpets where the design has spread. The product can be used to remove stains from iodine, fucorcin and some other synthetic dyes.

Solution preparation: dissolve the powder in hot water (at least 60°C) at a ratio of 30-50 g of powder to 1 litre of water. Take into account the temperature resistance of the product to be cleaned. Stir until completely dissolved.

Application: the solution can be used on pre-moistened or dry products. Apply the solution to the stain with a sponge or brush or to a pre-moistened carpet with a watering can. Spread the solution and leave on for 15-30 minutes. Rinse off any excess solution with clean water. A small amount of product will reduce the risk of staining during the drying process. Use the portion of the solution that is ready immediately after preparation, as the solution will become unusable after 20-30 hours.

Warning: Always conduct a color fastness test. Bleached items may darken when exposed to the preparation. It has a strong odor. When working with this product, respiratory and eye protection must be used – a respirator and protective goggles. Keep out of reach of children. Do not ingest. Avoid contact with the mucous membranes of the eyes. If contact with eyes occurs, rinse with plenty of water. If swallowed, rinse the mouth, do not induce vomiting, and seek medical attention. Toxic vapors are emitted by hot solutions and when solutions come into contact with acids.

Composition: sodium bisulfate, preservative, antioxidant.

Storage conditions: Store in a tightly closed container at a temperature of 5°C to 40°C in a vertical position, away from heat sources, open flames, sunlight, and atmospheric precipitation.

pH: 5.

Application: the solution can be used on pre-moistened or dry products. Apply the solution to the stain with a sponge or brush or to a pre-moistened carpet with a watering can. Spread the solution and leave on for 15-30 minutes. Rinse off any excess solution with clean water. A small amount of product will reduce the risk of staining during the drying process. Use the portion of the solution that is ready immediately after preparation, as the solution will become unusable after 20-30 hours.

Product Search

glass care   cleaner