Pro Rinse 1L
Video review
Amount
Purpose: product for neutralizing the residues of alkaline detergents, post-treatment of textile coatings by extraction.
Solution preparation: mix the concentrate with water in a ratio of 1:100-1:50 (100-200 ml/10 litres). Pro Rinse concentrate/solution should not be mixed with alkaline detergent solutions.
Application:
Neutralization and post-treatment: the solution is poured into the rinse tank and then rinsed through the textile coating. During the washing process it is necessary to focus on the residual softness of the surface, the formation of foam solution and the amount of contaminants washed away.
Neutralization: spray the solution generously onto the cleaned textile coating, spread the solution with a soft brush to spread it along the fibres, leave for 5-10 minutes and then rinse off the reaction products and excess solution are washed off with clean water by extraction.
Warning: The product contains acid, so when working in rooms with marble and other acid-sensitive decorative elements, measures must be taken to protect them. Before use, conduct a test for color fastness of the cleaned surface. Do not ingest. Avoid contact with mucous membranes. In case of eye contact, rinse thoroughly with plenty of water. If swallowed, rinse the mouth, do not induce vomiting, and seek medical attention. Keep out of reach of children.
Storage conditions: Store in a tightly closed container at temperatures between +5°C and +40°C in a vertical position, away from heat sources, open flames, sunlight, and atmospheric precipitation.
Composition: demineralized water, glycolic acid.
pH of concentrate: 2.5 +/- 0.2.
Application:
Neutralization and post-treatment: the solution is poured into the rinse tank and then rinsed through the textile coating. During the washing process it is necessary to focus on the residual softness of the surface, the formation of foam solution and the amount of contaminants washed away.
Neutralization: spray the solution generously onto the cleaned textile coating, spread the solution with a soft brush to spread it along the fibres, leave for 5-10 minutes and then rinse off the reaction products and excess solution are washed off with clean water by extraction.
