Disk Cleaner Alkaline 500ml
Video review
Amount
Helpix Professional Disk cleaner Alkaline is an alkaline cleaning agent designed for cleaning wheel disks of all types of vehicles. It is intended to remove embedded dust, road dirt, grease, and other automotive technical fluids. It is suitable for cleaning steel disks, as well as those painted with automotive enamel. Disk Cleaner Alkaline can be used without removing the tire and without taking the wheel off the axle.
It is safe for paint coatings, plastic, and rubber. It does not damage the surface structure or color. It is economical and convenient to use.
Warning: do not allow the product to dry to avoid chemical burns on the surface. Do not use the product on hot surfaces.
Advantages of the product Helpix Professional Disk cleaner Alkaline :
- Removes stubborn dirt from wheel disks.
- Washes away oil stains, road grime, and dust.
- Suitable for wheel disks with paint coating.
- Safe for plastic and rubber. 500 ml ≈ 8 wheels.
Application method: Before applying the product, the wheel disks should be brought to a normal temperature (10-30°C) using running water. Spray the product onto all surfaces of the disk using a sprayer with large droplets. Clean with a brush. Leave the product on for 1-3 minutes and rinse with a large volume of water using a pressure washer, hose or multiple times from a bucket. Dry the washed surface using towels or compressed air.
Composition: demineralized water, non-ionic surfactants less than 5%, anionic surfactants less than 5%, alkalis, potassium phosphate less than 5%, Na4-EDTA less than 5%, glycol.
Warning: keep out of reach of children. Do not keep near an open flame or heating devices. Do not ingest. In case of contact with eyes, rinse with plenty of water and, if necessary, seek medical attention.
Storage conditions: store the product at a temperature of 5°C to 35°C, away from heat sources, sunlight, and atmospheric precipitation.
Application method: Before applying the product, the wheel disks should be brought to a normal temperature (10-30°C) using running water. Spray the product onto all surfaces of the disk using a sprayer with large droplets. Clean with a brush. Leave the product on for 1-3 minutes and rinse with a large volume of water using a pressure washer, hose or multiple times from a bucket. Dry the washed surface using towels or compressed air.
Along with this product, we recommend purchasing:
