Organic residue cleaner Insect Off 5L
Amount
The car shampoos by TM Master's Line are products designed for manual, gentle, yet highly effective car body washing. These products allow for the removal of stubborn dirt, and their usage technology ensures control over the level of mechanical impact on the surface.
Organic residue cleaner Insect Off
The Insect Off by TM Master's Line is designed to remove tough organic contaminants of animal and plant origin (insect residue, bird droppings, tree sap, grass stains), road dust, and dirt from the surface of the car. It is used after dilution.
PH: 13.5 | 12.3
Dry percentage: 41 (±2)%
Proportion for Trigger spray:
1:10
Composition
Demineralized water, caustic soda, Na4-EDTA (5% to 15%), phosphonates (less than 5%), anionic surfactants (less than 5%), nonionic surfactants (less than 5%), dye.
General Application Method
If necessary, pre-rinse the heavily soiled areas to remove a thick layer of dirt. Cool down a hot body or remove ice from a frozen body by using a water stream from a hose. Perform the first phase of washing in the usual manner.
Dilute the concentrate with water according to the instructions. Make sure there are no abrasive particles on the body or the washing tool. Apply the cleaning solution to the body using a foam-generating tool, and then rub it with a sponge or glove (if a foam-generating tool is not available, a sponge or glove can be used to apply the solution and create foam). Leave the cleaning solution on the surface for 30-40 seconds and thoroughly rinse off the solution and dirt with clean water using a high-pressure water stream.
General Application Method
If necessary, pre-rinse the heavily soiled areas to remove a thick layer of dirt. Cool down a hot body or remove ice from a frozen body by using a water stream from a hose. Perform the first phase of washing in the usual manner.
Dilute the concentrate with water according to the instructions. Make sure there are no abrasive particles on the body or the washing tool. Apply the cleaning solution to the body using a foam-generating tool, and then rub it with a sponge or glove (if a foam-generating tool is not available, a sponge or glove can be used to apply the solution and create foam). Leave the cleaning solution on the surface for 30-40 seconds and thoroughly rinse off the solution and dirt with clean water using a high-pressure water stream.