Car shampoo Acid Shampoo 1:10 1L

The car shampoos by TM Master's Line are products designed for manual, gentle, yet highly effective car body washing. These products allow for the removal of stubborn dirt, and their usage technology ensures control over the level of mechanical impact on the surface.

Acid Shampoo Concentrate 1:10

The acidic car shampoo is designed for gentle touchless and manual car washing, neutralizing alkaline residues after active foam washing, removing newly formed calcium deposits and "static" dirt. It is ideal for cars protected with nanoceramic or quartz coatings. It is used as a product for the second phase of washing.

PH: 0.5 | 6.0
Dry percentage: 15 (±2)%

Proportion for Foam kit: 

1:10

Proportion for Manual application: 

1:100

Composition

Demineralized water, organic acid, anionic surfactants (5% to 15%), nonionic surfactants (5% to 15%), glycol ether (less than 5%), fragrance, dye.

General Application Method

If necessary, pre-rinse the heavily soiled areas to remove a thick layer of dirt. Cool down a hot body or remove ice from a frozen body by using a water stream from a hose. Perform the first phase of washing in the usual manner.
Dilute the concentrate with water according to the instructions. Make sure there are no abrasive particles on the body or the washing tool. Apply the cleaning solution to the body using a foam-generating tool, and then rub it with a sponge or glove (if a foam-generating tool is not available, a sponge or glove can be used to apply the solution and create foam). Leave the cleaning solution on the surface for 1-2 minutes and thoroughly rinse off the solution and dirt with clean water using a high-pressure water stream.