White Effect Powder 1kg
Purpose: The product is designed for delicate, non-alkaline bleaching of products made of cellulose, lignin-containing, protein, and other fibers, as well as for removing stains from certain plant dyes, enhancing other oxygen-based bleaching agents, and adding to alkaline cleaning solutions to increase cleaning ability and gentle bleaching.
Preparation of Solution:
For complete bleaching and stain removal: Dissolve 1-3 measuring spoons of powder (from 40 to 120 g) in two liters of room temperature water.
For adjustment and enhancement during cleaning: Dissolve 1.5 measuring spoons of powder (60 g) in 10 liters of prepared cleaning solution with a pH of 7 or higher.
Application:
Attention! For professional use only!
White Effect Powder solutions may decolorize various dyes, so it is necessary to conduct a particularly careful preliminary color fastness test on the product. Use with caution on colored items. Note that items that appear white are not always truly white!
Complete bleaching and stain removal: Apply the White Effect Powder solution to the dry item (in the case of stains, it can be applied to damp fabric, but the concentration should be increased to 120 g per 2 liters) in an amount sufficient to saturate the material, distribute along the fibers using a brush, wait for absorption, and visually observe the decolorization effect.
After removing stains and soiling, depending on the material and situation, rinse the surface with clean water, Cotton Cleaner Powder solution, Pro Rinse, or perform general cleaning.
Warning: Perform a preliminary color fastness test on the item to be cleaned. Avoid prolonged contact of the product with marble surfaces.
Do not ingest. If swallowed, rinse mouth, drink plenty of water, and seek medical attention immediately. If the product gets into the eyes, rinse with plenty of running water and seek medical attention.
Storage conditions: Store in a tightly closed original container at a temperature of 5 to 40°C, in a place inaccessible to children, in a vertical position, away from heat sources, open flames, sunlight, and atmospheric precipitation.
Composition: active oxygen, potassium bisulfate, ammonium bisulfate.
pH of 1% solution: 3.6 (±1)
Application:
Attention! For professional use only!
White Effect Powder solutions may decolorize various dyes, so it is necessary to conduct a particularly careful preliminary color fastness test on the product. Use with caution on colored items. Note that items that appear white are not always truly white!
Complete bleaching and stain removal: Apply the White Effect Powder solution to the dry item (in the case of stains, it can be applied to damp fabric, but the concentration should be increased to 120 g per 2 liters) in an amount sufficient to saturate the material, distribute along the fibers using a brush, wait for absorption, and visually observe the decolorization effect.
After removing stains and soiling, depending on the material and situation, rinse the surface with clean water, Cotton Cleaner Powder solution, Pro Rinse, or perform general cleaning.
