Gum Remover 200ml
Amount
Purpose: removal of chewing gum from textile coatings (upholstery of upholstered furniture, carpets, rugs, clothing).
Solution preparation: the product is ready to use. Does not require dilution or dissolving.
Application
Testing: carry out a test application and ensure that the product does not damage the coating, including the glue in the fabric, carpet backing, etc.
Preparation: if there is a varnished or painted floor under the carpet, place plastic wrap and absorbent material under the carpet. When cleaning furniture, if possible, place plastic wrap and absorbent material between the upholstery and the filler.
Stain removal: apply 1-2 ml of the product onto the stain, work the gum mechanically with a special spatula, mix the gum with the stain remover and leave for 3-5 minutes. Separate the softened chewing gum from the textile product with the same spatula and collect it with a napkin, the treatment area should be washed with a detergent solution using an extractor. If traces of chewing gum remain on the surface, repeat the treatment.
Warning: Always conduct a preliminary colorfastness test. Prohibited near open flames! Use only in well-ventilated areas. When working, it is recommended to use a respirator, protective goggles, or rubber gloves. Keep out of reach of children. Do not ingest. Avoid contact with the eyes' mucous membranes. If eye contact occurs, rinse with plenty of water. If swallowed, rinse the mouth, do not induce vomiting, and seek medical attention. Prohibited to discharge into water bodies and sewage systems!
Composition: mixture of hydrocarbons, non-ionic surfactants 5-15%, fragrance.
Storage conditions: Store in a tightly closed container at a temperature of 5°C to 40°C in a vertical position, away from heat sources, open flames, sunlight, and atmospheric precipitation.
Application
Testing: carry out a test application and ensure that the product does not damage the coating, including the glue in the fabric, carpet backing, etc.
Preparation: if there is a varnished or painted floor under the carpet, place plastic wrap and absorbent material under the carpet. When cleaning furniture, if possible, place plastic wrap and absorbent material between the upholstery and the filler.
Stain removal: apply 1-2 ml of the product onto the stain, work the gum mechanically with a special spatula, mix the gum with the stain remover and leave for 3-5 minutes. Separate the softened chewing gum from the textile product with the same spatula and collect it with a napkin, the treatment area should be washed with a detergent solution using an extractor. If traces of chewing gum remain on the surface, repeat the treatment.
