Gum Remover 100ml
Video review
Amount
Helpix Gum Remover is used to remove residues of chewing gum and plasticine from textile products (carpets, rugs, upholstered furniture, clothing). The product is a mixture of solvents that dissolve or soften polymeric contaminants, allowing them to be easily separated from the surface.
It can be used both in car interiors and in households. It is also effective for removing traces of stickers and adhesive tape.
Advantages of the product Helpix Gum Remover:
-
Тhis product removes chewing gum, clay, and adhesive residues.
-
Can be used both in the car interior and in household settings.
Application method: Testing:
Perform a test application and ensure that the product does not damage the surface, including any adhesive on the fabric, the base of the carpet, etc.
Preparation:
If there is a lacquered or painted floor under the carpet, place a polyethylene film and absorbent material under the carpet.
When cleaning furniture, if possible, place polyethylene film and absorbent material between the upholstery and the filling.
Stain Removal:
Apply 1-2 ml of the product to the stain.
Mechanically treat the gum using a special spatula, mixing the gum with the stain remover.
Wait for 3-5 minutes.
Separate the softened stain from the textile product using the spatula and collect it with a cloth.
Rinse the treated area with a cleaning solution using an extractor.
If there are still traces of the stain on the surface, repeat the treatment.before application, it is recommended to thoroughly vacuum the surface, remove debris, pet hair, and to mechanically clean any stains that may spread during the cleaning process (e.g., vomit residues, graphite grease, voluminous paint spills).
Shake the can well before using the product. By pressing on the spray nozzle (the first press may require some effort to break the seal), evenly apply the product to the surface and allow it to penetrate slightly.
Gently scrub the surface with a brush of optimal stiffness. Leave the product for 5 minutes. If the product starts to dry, add a new portion. Clean the entire surface with a microfiber cloth, making sure the cloth does not shed or stain the surface. Collect the foam and separated dirt, if necessary, rinsing the cloth in clean water. Wipe with dry cloth.
Useful tips from Helpix TM:
For even greater effectiveness, apply the product to the surface with the stain, place a soaked cotton pad on top of the spot, and wait for 2 minutes. Then, clean the surface according to the instructions.
Composition: aliphatic hydrocarbon solvent more than 30%, ether from 5% to 15%, plant terpenes from 5% to 15%, non-ionic surfactants from 5% to 15%, fragrance.
Warning: keep out of reach of children. Do not keep near open flame or heaters. Do not use as food. In case of contact with eyes, rinse with plenty of water, if necessary, consult a doctor.
Storage conditions: store the product at a temperature between 5°C and 35°C, away from heat sources, sunlight, and atmospheric precipitation.
Application method: Testing:
Perform a test application and ensure that the product does not damage the surface, including any adhesive on the fabric, the base of the carpet, etc.
Preparation:
If there is a lacquered or painted floor under the carpet, place a polyethylene film and absorbent material under the carpet.
When cleaning furniture, if possible, place polyethylene film and absorbent material between the upholstery and the filling.
Stain Removal:
Apply 1-2 ml of the product to the stain.
Mechanically treat the gum using a special spatula, mixing the gum with the stain remover.
Wait for 3-5 minutes.
Separate the softened stain from the textile product using the spatula and collect it with a cloth.
Rinse the treated area with a cleaning solution using an extractor.
If there are still traces of the stain on the surface, repeat the treatment.before application, it is recommended to thoroughly vacuum the surface, remove debris, pet hair, and to mechanically clean any stains that may spread during the cleaning process (e.g., vomit residues, graphite grease, voluminous paint spills).
Shake the can well before using the product. By pressing on the spray nozzle (the first press may require some effort to break the seal), evenly apply the product to the surface and allow it to penetrate slightly.
Gently scrub the surface with a brush of optimal stiffness. Leave the product for 5 minutes. If the product starts to dry, add a new portion. Clean the entire surface with a microfiber cloth, making sure the cloth does not shed or stain the surface. Collect the foam and separated dirt, if necessary, rinsing the cloth in clean water. Wipe with dry cloth.
