FoamBlocker 250ml
Video review
Amount
Purpose: defoamer is designed to extinguish and/or prevent the formation of foam in the tanks of suction equipment - tanks of vacuum cleaners, water pumps, sludge pumps, floor cleaners. Allows you to control the level of foam in the tank.
Solution preparation: the product is used in the form of concentrate or diluted not more than 1:300 (30ml/9 litres of water).
Application:
Addition to the tank: Pour 35-50 ml of the defoamer concentrate per 10 litres of water into the suction solution tank.
Injecting into the hose: when working with equipment equipped with hand-held nozzles connected by a corrugated hose, it is permissible to use the product by injecting it into the nozzle or hose. This method of use allows the defoamer to be effectively mixed with the liquid being sucked up.
Absorption of the defoamer solution: the most effective way to extinguish foam and prevent its excessive formation is to absorb a pre-prepared foam extinguishing agent solution through the working nozzle. To do this, prepare a defoamer solution at a ratio of 35-50 ml per 2 litres of water before starting work, suck a small amount of this solution through the nozzle into an empty liquid collection tank and then, from time to time, add more defoamer solution if necessary.
Warning: Do not mix with cleaning solutions before use (only with spent solutions). Do not apply to textile materials! The product may leave greasy stains on porous and absorbent surfaces! If contact with eyes occurs, rinse thoroughly with water and seek medical attention. Avoid prolonged contact with marble surfaces. Do not ingest. If swallowed, rinse the mouth, drink plenty of water, do not induce vomiting, and seek immediate medical attention. Keep out of reach of children.
Composition: prepared water, non-ionic surfactants < 15%, cationic surfactants < 5%, preservative, chelating agents.
Storage conditions: Store in a tightly closed container at a temperature of 5°C to 40°C in a vertical position, away from heat sources, open flames, sunlight, and atmospheric precipitation.
ApplicationAddition to the tank: Pour 35-50 ml of the defoamer concentrate per 10 litres of water into the suctionsolution tank.Injecting into the hose: when working with equipment equipped with hand-held nozzles connected by acorrugated hose, it is permissible to use the product by injecting it into the nozzle or hose. This methodof use allows the defoamer to be effectively mixed with the liquid being sucked up.Absorption of the defoamer solution: the most effective way to extinguish foam and prevent its excessiveformation is to absorb a pre-prepared foam extinguishing agent solution through the working nozzle. Todo this, prepare a defoamer solution at a ratio of 35-50 ml per 2 litres of water before starting work, sucka small amount of this solution through the nozzle into an empty liquid collection tank and then, fromtime to time, add more defoamer solution if necessary.
Application:
Addition to the tank: Pour 35-50 ml of the defoamer concentrate per 10 litres of water into the suction solution tank.
Injecting into the hose: when working with equipment equipped with hand-held nozzles connected by a corrugated hose, it is permissible to use the product by injecting it into the nozzle or hose. This method of use allows the defoamer to be effectively mixed with the liquid being sucked up.
Absorption of the defoamer solution: the most effective way to extinguish foam and prevent its excessive formation is to absorb a pre-prepared foam extinguishing agent solution through the working nozzle. To do this, prepare a defoamer solution at a ratio of 35-50 ml per 2 litres of water before starting work, suck a small amount of this solution through the nozzle into an empty liquid collection tank and then, from time to time, add more defoamer solution if necessary.
