Foam Skin Cleaner 150ml
Video review
Amount
Purpose: for cleaning the skin of paint coating, skin substitutes and vinyl coatings from grease, dust and
water soluble stains. For professional use only!
Solution preparation: the product is ready to use. Does not require dilution or dissolving.
Application: apply a small amount of foam to a soft sponge and spread over the surface to be cleaned, using a soft brush or scrub brush to work into the relief of the surface as required. Absorb the solution and dissolved dirt with a soft absorbent cloth. Repeat if necessary. After cleaning, spray the surface with a small amount of clean water from a spray bottle and wipe dry with a soft white woven cloth. If there is any possibility of water getting into the seams or damaging the paint, remove the detergent with a damp and dry cloth.
Warning: Before use, inspect surfaces, and document any damages found. Perform a surface test: apply a portion of the product and leave it for 10-15 minutes, then gently rub the surface with a soft cloth and lightly scratch with a fingernail. If the paint peels off or begins to come off under your fingernail, using this product to clean such a surface is prohibited. Avoid pooling of the product in puddles and prolonged soaking of the coating in one place. Dye from colored cloths may transfer to the coating, so it is recommended to use white absorbent cloths. Do not apply to aniline leather, natural nubuck, or leather with a wax protective top layer. Not recommended for use on perforated leather. Store in a place inaccessible to children. If the product comes into contact with eyes, rinse thoroughly with water and seek medical attention. In case of ingestion, immediately rinse the mouth, drink plenty of water, and seek medical attention.
Storage conditions: Store in a tightly closed container at temperatures between +5°C and +40°C, in a vertical position, away from heat sources, open flames, sunlight, and atmospheric precipitation.
Composition: prepared water, complexing agent, anionic surfactants <5%, non-ionic surfactants 5-15%, fragrance.
Application: apply a small amount of foam to a soft sponge and spread over the surface to be cleaned, using a soft brush or scrub brush to work into the relief of the surface as required. Absorb the solution and dissolved dirt with a soft absorbent cloth. Repeat if necessary. After cleaning, spray the surface with a small amount of clean water from a spray bottle and wipe dry with a soft white woven cloth. If there is any possibility of water getting into the seams or damaging the paint, remove the detergent with a damp and dry cloth.
