Extrakt Powder Biosolv 1kg
Video review
Amount
Purpose: the product is intended for cleaning waterproof and alkali-resistant textile coatings by extraction, including hot extraction. The effectiveness of the product does not depend on the hardness of the water. Solution preparation: dissolve 25-35 g (one scoop) of Extract Powder Biosolv in 10 litres of water. It is recommended to use water with a temperature of +30°C and above.
Solution preparation: dissolve 25-35 g (one scoop) of Extract Powder Biosolv in 10 litres of water. It is recommended to use water with a temperature of +30°C and above.
Application: pour the ready solution of Extract Powder Biosolv into the tank of the extractor (vacuum cleaner). Clean the textile surface by simultaneously feeding the solution and collecting it with the extractor. Use a solution enriched with Cleaner Powder (10-15g per 10 litres of solution) or pre-soak with Enzime Hard Clean solution for very polluted products.
It is not necessary to rinse commercial floor coverings that have been cleaned with Extract Powder Biosolv solution without additives or with Cleaner Powder only, without pre-treatment with Enzime Hard Clean solution. Furniture upholstery and carpets used in the home should always be rinsed with Acid Cleaner solutions after cleaning with Extract Powder Biosolv according to the instructions.
Warning: Be sure to conduct a colorfastness test on the fabric before use. Avoid prolonged contact with marble surfaces. Do not ingest. Prevent contact with mucous membranes. If contact with eyes occurs, rinse thoroughly with plenty of water. If swallowed, rinse the mouth, do not induce vomiting, and seek medical attention. Keep out of reach of children.
Storage conditions: Store in a tightly closed container at temperatures ranging from +5°C to +40°C, in a vertical position, away from heat sources, open flames, sunlight, and atmospheric precipitation.
Composition: sodium tripolyphosphate, a mixture of surfactants 5-15%, sodium carbonate, d-limonene
Solution pH: 9.
Application: pour the ready solution of Extract Powder Biosolv into the tank of the extractor (vacuum cleaner). Clean the textile surface by simultaneously feeding the solution and collecting it with the extractor. Use a solution enriched with Cleaner Powder (10-15g per 10 litres of solution) or pre-soak with Enzime Hard Clean solution for very polluted products.
It is not necessary to rinse commercial floor coverings that have been cleaned with Extract Powder Biosolv solution without additives or with Cleaner Powder only, without pre-treatment with Enzime Hard Clean solution. Furniture upholstery and carpets used in the home should always be rinsed with Acid Cleaner solutions after cleaning with Extract Powder Biosolv according to the instructions.
