Enzyme Hard Clean 5kg
Video review
Amount
Purpose: the Enzyme Hard Clean solution is intended for the pre-moistening of textile coverings that are resistant to wetting (including carpets, upholstery of upholstered furniture, floor carpets, curtains) prior to cleaning by extraction, including hot extraction. Enzyme Hard Clean contains a complex of active ingredients and enzymes that effectively removes a wide range of soils containing proteins, fats and other soil components typical of household and catering environments.
Solution preparation: dissolve Enzyme Hard Clean in clean, warm water at a rate of 10-20 grams per 1 litre of water until the components are completely dissolved. To increase cleaning power, 25-50 grams of Cleaner Powder can be added to 1 litre of Enzyme Hard Clean solution with water. Use warm water (40-60°C) to prepare the solution. Do not use hotter water (enzymes will be inactivated and effectiveness will be reduced).
Application: apply the solution to the textile surface using a large drop sprayer, brush or sponge. Typical consumption of the solution is 50 to 300 ml per m2, depending on the type of textile coating, soiling and work organisation. Apply the solution over the surface with a brush of appropriate stiffness; as the better the solution is mixed with the dirt, the more efficiently it will be distributed and the deeper it will penetrate into the dirt, thus ensuring the effectiveness of its action and subsequent cleaning.Carry out the main cleaning and rinse off the solution and separated dirt with Extract Powder Biosolv, Extract 10 and/or rinse with Acid Cleaner.
Warning: Before use, conduct a preliminary colorfastness test on the item subject to cleaning. Avoid prolonged contact of the product with marble surfaces. Do not allow contact with eyes or ingestion. If contact with eyes occurs, rinse with plenty of water. It is recommended to use rubber gloves, anti-aerosol masks, and protective eyewear. Keep out of reach of children.
Composition: oligomeric tripolyphosphate, sodium carbonate, sodium hydrophosphate, chelating agent, terpene hydrocarbon, anionic surfactants 5 - 15%, enzyme complex.
Storage conditions: Store in a tightly closed container at a temperature of 5°C to 40°C in a vertical position, away from heat sources, open flames, sunlight, and atmospheric precipitation.
Application: apply the solution to the textile surface using a large drop sprayer, brush or sponge. Typical consumption of the solution is 50 to 300 ml per m2, depending on the type of textile coating, soiling and work organisation. Apply the solution over the surface with a brush of appropriate stiffness; as the better the solution is mixed with the dirt, the more efficiently it will be distributed and the deeper it will penetrate into the dirt, thus ensuring the effectiveness of its action and subsequent cleaning.Carry out the main cleaning and rinse off the solution and separated dirt with Extract Powder Biosolv, Extract 10 and/or rinse with Acid Cleaner.
