Disk Cleaner (Acidic) 5L
Amount
Disk Cleaners by TM Master’s Line are cleaners specifically designed to remove stubborn dirt from wheel rims and the automotive paint surface. They are suitable for cleaning steel and aluminum rims, including matte, painted, and chrome finishes. These disk cleaners can be used without removing the tire or dismounting the wheel.
Disk Cleaner (Acidic)
The acid-based disk cleaner is designed to remove metal oxides (rust), mineral deposits (efflorescence, salt stains), embedded dust, brake dust, fine iron particles, and other adsorbed mineral contaminants. It also helps neutralize alkaline residues from previous washes.
It contains orthophosphoric acid and cationic surfactants, which act as corrosion inhibitors, protecting the metal surfaces during and after the cleaning process.
PH: 0.5 | 1.0
Dry percentage: 24.6 (±2)%
Proportion for Trigger Spray:
1:3 — 1:6
Composition
Demineralized water, a blend of organic acids, non-ionic surfactants (5% to 15%), dye, fragrance.
General Application Method
Ensure that the wheel rim is at a normal temperature (0-25°C). Remove any dirt and oil stains using the body washing technique. Use a 1:3 dilution ratio. Apply the disk cleaner directly onto the wheel rim. Scrub the surface using a brush, allow the cleaner to sit for 1-2 minutes, then rinse with a high-pressure stream of water. Dry the surface thoroughly. If necessary, repeat the process.
General Application Method
Ensure that the wheel rim is at a normal temperature (0-25°C). Remove any dirt and oil stains using the body washing technique. Use a 1:3 dilution ratio. Apply the disk cleaner directly onto the wheel rim. Scrub the surface using a brush, allow the cleaner to sit for 1-2 minutes, then rinse with a high-pressure stream of water. Dry the surface thoroughly. If necessary, repeat the process.
Along with this product, we recommend purchasing:
