Cleaner Powder 1L

Purpose: stain remover for carpets and upholstered furniture. It can decolourise a wide range of dyes of biological origin and some synthetic dyes. It is used to remove stains from wine, juices, tea, coffee, berries and some ink residues. It can be used as a booster for alkaline detergents.

Solution preparation: mix 20-40g of powder with 250ml of warm (50-65°C) water until the granules are completely dissolved. Do not use hotter water as this will cause rapid decomposition of the active ingredients. The solution loses much of its activity at temperatures below 30°C. Use the ready-to-use solution as soon as possible; its activity decreases 2-4 times within 15 minutes.

Application: apply the solution to the stain with a special brush or sponge, leave for 5-15 minutes, then rinse thoroughly. Repeat if necessary. Rinse the treated area with Acid Cleaner solution when completed. To use as a booster, add Cleaner Powder to the alkaline detergent solution (25-50g of powder per 10 litres of solution).

Warning: The product is not recommended for cleaning products made of protein fibers (wool, silk). Before use, conduct a colorfastness test on the cleaned surface. After cleaning with Cleaner Powder, surfaces should be thoroughly rinsed with Acid Cleaner solution. Do not ingest. Avoid contact with mucous membranes. If contact with eyes occurs, rinse with plenty of water. If ingested, promptly rinse the mouth, do not induce vomiting, and seek immediate medical attention. Keep out of reach of children.

Storage conditions: Store in a tightly closed container at a temperature ranging from +5°C to +40°C in a vertical position, away from heat sources, open flames, sunlight, and atmospheric precipitation.

Composition: peroxide compounds, tetraacetylethylenediamine, dye transfer inhibitor, fragrance.

Solution pH: 10.