Carpet Shampoo Hard 1L
Amount
Purpose: foam detergent is intended for washing waterproof carpets in a professional workshop using rotary floor scrubbers or automatic machines. It is recommended for heavily soiled woven pile carpets made of polypropylene, polyamide, polyester fibres and acrylics.
Solution preparation: dilute the concentrate in clean, warm (30-50°C) water at a ratio of 50-150 ml/10 litres. Note the concentrate has a thick consistency and some will remain on the walls of the measuring cup. Rinse the measuring cup in a shampoo solution to remove this residue. You can add Despotter to the solution as a booster: 50-100ml per 10 litres of shampoo solution.
Application: when washing with a rotary machine, pre-soak the carpet with clean water and remove excess water with a scraper. Apply the shampoo solution to the product (0.5-1.5 l/ m2). Scrub the surface with a rotary machine using a brush of appropriate hardness. Remove the foam and rinse the carpet several times with clean water. Pour Acid Cleaner solution (50ml per 10 litres of water) over the product, leave for 1-5 minutes, rinse again with clean water, spin in a special centrifuge and place in a drying chamber.
Warning: Do not use for mobile carpet cleaning and soft furniture. The product must be rinsed thoroughly. Before use, conduct a color fastness test on the surface to be cleaned. Avoid contact with the eyes' mucous membranes. In case of eye contact, rinse with plenty of water and seek medical attention. Do not ingest. If swallowed, rinse the mouth, drink plenty of water, do not induce vomiting, and seek immediate medical attention. Keep out of reach of children.
Storage conditions: Store in a tightly closed container at temperatures between 5°C and 40°C in a vertical position, away from heat sources, open flames, sunlight, and atmospheric precipitation.
Composition: demineralized water, anionic surfactants 5-15%, alkali, complexing agent, organic acid, non-ionic surfactants 5-15%, fragrance, opacifier, preservative.
pH of concentrate: 12.
pH of solution: 11.
Application: when washing with a rotary machine, pre-soak the carpet with clean water and remove excess water with a scraper. Apply the shampoo solution to the product (0.5-1.5 l/ m2). Scrub the surface with a rotary machine using a brush of appropriate hardness. Remove the foam and rinse the carpet several times with clean water. Pour Acid Cleaner solution (50ml per 10 litres of water) over the product, leave for 1-5 minutes, rinse again with clean water, spin in a special centrifuge and place in a drying chamber.
