Car Shampoo Concentrate 1:150 1L
Video review
Amount
The car shampoos by TM Master's Line are products designed for manual, gentle, yet highly effective car body washing. These products allow for the removal of stubborn dirt, and their usage technology ensures control over the level of mechanical impact on the surface.
Car Shampoo Concentrate 1:150
The neutral high-foaming shampoo is an excellent product for the second phase of car washing (removal of "static" dirt). It effectively removes dirt from painted surfaces and glass. It easily dissolves in both cold and warm water. It works well even in hard water and is suitable for the most delicate car washing, including premium segment vehicles.
PH: 7.0 | 7.0
Dry percentage: 18 (±2)%
Proportion for Foam kit:
1:10
1:15
Proportion for Manual application:
1:150
Composition
Demineralized water, organic acid, anionic surfactants (5% to 15%), nonionic surfactants (5% to 15%), glycol ether (less than 5%), fragrance, dye.
General Application Method
If necessary, pre-rinse the heavily soiled areas to remove a thick layer of dirt. Cool down a hot body or remove ice from a frozen body by using a water stream from a hose. Perform the first phase of washing in the usual manner.
Dilute the concentrate with water according to the instructions. Make sure there are no abrasive particles on the body or the washing tool. Apply the cleaning solution to the body using a foam-generating tool, and then rub it with a sponge or glove (if a foam-generating tool is not available, a sponge or glove can be used to apply the solution and create foam). Leave the cleaning solution on the surface for 1-2 minutes and thoroughly rinse off the solution and dirt with clean water using a high-pressure water stream.
General Application Method
If necessary, pre-rinse the heavily soiled areas to remove a thick layer of dirt. Cool down a hot body or remove ice from a frozen body by using a water stream from a hose. Perform the first phase of washing in the usual manner.
Dilute the concentrate with water according to the instructions. Make sure there are no abrasive particles on the body or the washing tool. Apply the cleaning solution to the body using a foam-generating tool, and then rub it with a sponge or glove (if a foam-generating tool is not available, a sponge or glove can be used to apply the solution and create foam). Leave the cleaning solution on the surface for 1-2 minutes and thoroughly rinse off the solution and dirt with clean water using a high-pressure water stream.
