BioGel 250ml
Video review
Amount
Purpose: gel-like product (stain remover) for removing stains from chewing gum, grease, oil products, some paints and adhesives. The product is suitable for removing stains from textile coatings (upholstery of upholstered furniture, carpets, rugs) that cannot be cleaned without leaking (absorbing) active ingredients into the adhesive layer.
Solution preparation: the product is ready to use. Does not require dilution or dissolving.
Application: there is no reason for complaint if the product delaminates. Before use, shake well! Pour the product onto the spot, making sure that the spot remover is mixed with the dirt and that it penetrates between the fibres of the product by treating the surface of the spot with a special spatula, wait for 5-15 minutes. After that, rub the product on the stain once again, collect the resulting mass with the spatula on a napkin and rinse the area with a detergent solution. Repeat the process if necessary. When working on old greasy stains, the stain remover can be left on for longer as the volatile components of the product evaporate and the sorbent absorbs the dissolved dirt.
Warning: Before use, conduct a colorfastness test on the cleaned surface. If contact with eyes occurs, thoroughly rinse with water and seek medical attention. Avoid prolonged contact with marble surfaces. If ingested, promptly rinse the oral cavity, drink plenty of water, do not induce vomiting, and seek immediate medical attention. Keep out of reach of children.
Composition: propylene glycol ether, mixture of hydrocarbons and terpenes, anionic surfactants 5-15%, water, absorbent.
Storage conditions: Store in a tightly closed container at a temperature ranging from +5°C to +40°C in a vertical position, away from heat sources, open flames, sunlight, and atmospheric precipitation.
Application: there is no reason for complaint if the product delaminates. Before use, shake well! Pour the product onto the spot, making sure that the spot remover is mixed with the dirt and that it penetrates between the fibres of the product by treating the surface of the spot with a special spatula, wait for 5-15 minutes. After that, rub the product on the stain once again, collect the resulting mass with the spatula on a napkin and rinse the area with a detergent solution. Repeat the process if necessary. When working on old greasy stains, the stain remover can be left on for longer as the volatile components of the product evaporate and the sorbent absorbs the dissolved dirt.
