Acid Cleaner 5L
Video review
Amount
Purpose: neutralization of alkaline detergent residues, cleaning or post-treatment of textile coatings by extraction.
Solution preparation: mix the concentrate with water in a ratio of 1:200 - 1:100 (50-100 ml / 10 l). Acid Cleaner concentrate/solution should not be mixed with alkaline detergent solutions.
Application:
Acid Cleaner solution can be used in two ways.
Neutralization, cleaning or post-treatment: pour the solution into the rinse tank and then rinsed through the textile coating. During the rinsing process, it is necessary to pay attention to the residual softness of the surface, the foaming of the solution and the amount of dirt washed away.
Neutralization: the cleaned textile coating is sprayed with the solution, rubbed with a soft brush to distribute it over the fiber. Allow to stand for 5 to 10 minutes and then wash off the reaction products and excess solution with clean water by extraction.
Warning: The product contains acid, so when working in rooms with marble and other acid-sensitive decorative elements, measures must be taken to protect them. Before use, conduct a test for color fastness of the cleaned surface. Do not ingest. Avoid contact with mucous membranes. In case of eye contact, rinse thoroughly with plenty of water. If swallowed, rinse the mouth, do not induce vomiting, and seek medical attention. Keep out of reach of children.
Storage conditions: Store in a tightly closed container at temperatures between +5°C and +40°C, in a vertical position, away from heat sources, open flames, sunlight, and atmospheric precipitation.
Composition: demineralized water, glycolic acid, non-ionic surfactants less than 5%, fragrance.
pH of concentrate: 2.5 +/-0.2
Application:
Acid Cleaner solution can be used in two ways.
Neutralization, cleaning or post-treatment: pour the solution into the rinse tank and then rinsed through the textile coating. During the rinsing process, it is necessary to pay attention to the residual softness of the surface, the foaming of the solution and the amount of dirt washed away.
Neutralization: the cleaned textile coating is sprayed with the solution, rubbed with a soft brush to distribute it over the fiber. Allow to stand for 5 to 10 minutes and then wash off the reaction products and excess solution with clean water by extraction.
